Sunday, June 12, 2016

The points need to note when using the peanut sheller


1,The moving parts of peanut sheller adopt triangle belt transmission. New belt would be stretched and get loose gradually due to the tension after using for a period of time. Thus, adjustment of belt should be made according to the situation so as not to affect the rotating speed of peanut sheller.

2,The bearing of peanut sheller should be checked timely. Once wear or oil starvation is found, the operator should refuel or replace the bearing timely.

3,In the operation of peanut sheller, temperature variation of some parts should be noticed, especially when the working voltage is lower (lower than 380v). The temperature of the motor can't be more than 60 degrees Celsius and the temperature of the bearing should not be more than 25 degrees Celsius. Once excessive temperature is found, the operator should find out the reason timely and eliminate it.

4,Before starting the peanut sheller, the operator should check the fastening bolt of each part. Tighten the bolt timely if it is loose. Special attention should be paid to the parts with high rotation speed, such as the upper and lower fan blade. Note whether there is wear or fracture in the fan blade and whether there is wear or deformation in the external reinforcement plate of blade. Once problem is found, the operator should make timely repair or replacement; the hoisting shaft of sorting sieve and the joint of eccentric shaft and sorting sieve should be checked carefully.

Video of peanut shelling machine working

Our company is one of the earliest enterprises in production of peanut machinery, we have been continuously improving our technology strength, production process and product quality over the years to provide customers with the most advanced technology and best quality products. Welcome customers to negotiate and cooperate!

Utilization of peanut shell
Introduction and instructions of the peanut shelling machine
Peanut shelling machine,Peanut Shell Removing Machine
Reason for the low shelling rate of peanut peeling machine

No comments:

Post a Comment